Truloc - Bonding with Industry

Bonding

Two-components adhesive curing by contact, does not require mixing. Fixing time from 1 to 3 minutes. Suitable for bonding metals, ceramics, glass, wood, hard plastics highly resistant to impact, peeling and tensile.

Bearing Grade

Medium strength anaerobic adhesive for retaining of bearings, liners, bushes, keys and splines. Highly resistant to temperatures (-50o to +150oC), corrosion, vibrations, water, gases, oils, hydrocarbons and many chemicals.

Penetrating Grade

Low viscosity and high capillary action for locking and sealing threaded fasteners and close fittings parts post assembly, also to penetrate and seal metal porosity in moulds and in castings. Highly resistant to temperatures (-50o to +150oC), corrosion, vibrations, water, gases, oils, hydrocarbons, and many chemicals, medium to high strength locking.

Nut Grade

Medium strength anaerobic adhesive for thread locking of nuts and bolts of all types that require to be dismantled. Suitable to be used on oily surfaces. Highly resistant to temperatures (-50o to +150oC), corrosion, vibrations, water, gas, oils, hydrocarbons and many chemicals.